kiloHearts Bundle v2016.04 Incl Patched and Keygen-R2R

kiloHearts Bundle v2016.04 Incl Patched and Keygen-R2R®

Download


The kHs Toolbox is a bundle of 24 snapins along with the Snapin host Snap Heap. You get all of these:

Bitcrush
Runs on Windows 7 or greater, 32bit and 64bit Runs on Mac OSX 10.7 or greater, 32bit and 64bit VST 2 compatible Audio Unit compatible AAX compatible Available as Reason Rack Extension Get the Rack Extension
When nostaliga hits, Bitcrush can bring you back to the digital hardware of times past. It simulates the audio being played back using a low quality sampler with limited sample rate and bit depth. Mm, crunchy.

The Bitcrush can be used to create distorting effects that sound like that of scraping analog radio, or inherently lo-fi sound sources, like old video games.

Rate display
Down sample the signal to a minimum of 200 Hz.
Bits knob
Quantize the amplitude of each sample of the signal. A lower value will result in a more distorted sound.
ADC Q knob
Quality of the analog-to-digital conversion. A lower value will add dissonant aliasing in the low frequencies.
DAC Q knob
Quality of the digital-to-analog conversion. A lower value will add dissonant aliasing in the high frequencies.
Dither knob
Adds noise to the signal in order to reduce distortion caused by quantization.
Mix knob
The dry/wet mix of this effect. A lower value will let some of the unmodified signal through.
Settings panel
Whenever you have your mouse cursor over a snapin theree is a small arrow at the top right corner (not visible in screenshot). It opens a settings panel where you handle presets.

It also has a “randomize” button that can be useful. I guess…
Enabled checkbox
The small checkbox to the left of the plugin name is a checkbox that bypasses the effect when disabled.
Resize handle
The bottom right corner of all Kilohearts plugins is a resize handle for scaling the UI to any size. This allows you to get a good view of the controls whatever the screen resolution, and also comes in handy if you need big controls, e.g. when using Bitcrush as a real-time effect on a touchscreen monitor during a live set. (This is not available when the snapin is used inside a snapin host.)
Get more out of Bitcrush!

Bitcrush shines on it´s own, but it was primarily created to power up the different “Snapin Hosts” Kilohearts offer. These are bigger effects units that utilize all the available snapins and give you a really fun and creative workflow for combining them in any way you can think of. So have a look at Snap Heap and Multipass right now!

Ever since mankind invented music, there has been a desire to make it heavier.[Citation needed] Distortion can take your sound from zero to sword wielding hero in seconds.

5 different distortion shapes are available to add a tinge of edge or rip things apart. In stereo, if that’s what you’re into.

Drive knob
The drive setting will boost the input signal, causing a heavier distortion.
Bias knob
The bias will add a DC offset to the signal before distorting. Adding some bias can prevent the distorted audio from sounding hollow and uninteresting.
Spread knob
The spread will add different amount of bias to the left and right channels. This can give some nice and subtle stereo widening.
Type
The flavor of distortion. Select between overdrive, saturate, foldback, sine and hard clip.
Dynamics
A common problem with distortion is that it can remove the dynamic content of the input signal, forcing the output to maximum volume. Turn up this knob to preserve the dynamics of the input.
Mix knob
The dry/wet mix of this effect. A lower value will let some of the unmodified signal through.
Settings panel
Whenever you have your mouse cursor over a snapin theree is a small arrow at the top right corner (not visible in screenshot). It opens a settings panel where you handle presets.

It also has a “randomize” button that can be useful. I guess…
Enabled checkbox
The small checkbox to the left of the plugin name is a checkbox that bypasses the effect when disabled.
Resize handle
The bottom right corner of all Kilohearts plugins is a resize handle for scaling the UI to any size. This allows you to get a good view of the controls whatever the screen resolution, and also comes in handy if you need big controls, e.g. when using Distortion as a real-time effect on a touchscreen monitor during a live set. (This is not available when the snapin is used inside a snapin host.)
Get more out of Distortion!

Distortion shines on it´s own, but it was primarily created to power up the different “Snapin Hosts” Kilohearts offer. These are bigger effects units that utilize all the available snapins and give you a really fun and creative workflow for combining them in any way you can think of. So have a look at Snap Heap and Multipass right now!

Limiter
Runs on Windows 7 or greater, 32bit and 64bit Runs on Mac OSX 10.7 or greater, 32bit and 64bit VST 2 compatible Audio Unit compatible AAX compatible Available as Reason Rack Extension Get the Rack Extension
Whether you want to crank the last drops of gain out of your track or just want to control a few loud peaks, a Limiter can be the weapon of choice.

By looking a little bit into the future, a limiter can make sure your signal never goes louder than you want it to without distorting or destroying transients. Even with the knob turned to 11.

In gain knob
Gain to apply to the input signal before limiting.
Out gain knob
Gain to apply to the input signal after limiting.
Threshold knob
The maximum allowed volume.
Release knob
The release adjust how quickly the limiter returns the volume back to normal after limiting it due to a peak in the input volume.
VU Meter
Displays the current input level, the selected threshold, and the limiter’s current attenuation.
Settings panel
Whenever you have your mouse cursor over a snapin theree is a small arrow at the top right corner (not visible in screenshot). It opens a settings panel where you handle presets.

It also has a “randomize” button that can be useful. I guess…
Enabled checkbox
The small checkbox to the left of the plugin name is a checkbox that bypasses the effect when disabled.
Resize handle
The bottom right corner of all Kilohearts plugins is a resize handle for scaling the UI to any size. This allows you to get a good view of the controls whatever the screen resolution, and also comes in handy if you need big controls, e.g. when using Limiter as a real-time effect on a touchscreen monitor during a live set. (This is not available when the snapin is used inside a snapin host.)
Get more out of Limiter!

Limiter shines on it´s own, but it was primarily created to power up the different “Snapin Hosts” Kilohearts offer. These are bigger effects units that utilize all the available snapins and give you a really fun and creative workflow for combining them in any way you can think of. So have a look at Snap Heap and Multipass right now!

Ring Mod
Runs on Windows 7 or greater, 32bit and 64bit Runs on Mac OSX 10.7 or greater, 32bit and 64bit VST 2 compatible Audio Unit compatible AAX compatible Available as Reason Rack Extension Get the Rack Extension
A ring modulator gets its name from the way the original analog schematic used a ring of diodes to multiply two signals together. Honestly the schematics is more of a square, but who cares when you can trash your sound beyond recognition in both pleasant and horrible ways?

The kHs Ring Mod uses either an internal sine/noise generator or a secondary input as the second signal in the modulation, and allows for versatile transformation of the modulating signal.

Bias knob
Amount of positive bias to add to the secondary input.
Rectify knob
Amount of positive or negative rectification to apply to the of the secondary input.
Frequency knob
The base frequency of the internal oscillator or filter cutoff for the internal noise generator.
Spread knob
Shifts the frequency of the internal generator slightly for left and right channels to achieve a stereo effect.
Modulator
Selects the secondary input.
Mix knob
The dry/wet mix of this effect. A lower value will let some of the unmodified signal through.
Settings panel
Whenever you have your mouse cursor over a snapin theree is a small arrow at the top right corner (not visible in screenshot). It opens a settings panel where you handle presets.

It also has a “randomize” button that can be useful. I guess…
Enabled checkbox
The small checkbox to the left of the plugin name is a checkbox that bypasses the effect when disabled.
Resize handle
The bottom right corner of all Kilohearts plugins is a resize handle for scaling the UI to any size. This allows you to get a good view of the controls whatever the screen resolution, and also comes in handy if you need big controls, e.g. when using Ring Mod as a real-time effect on a touchscreen monitor during a live set. (This is not available when the snapin is used inside a snapin host.)
Get more out of Ring Mod!

Ring Mod shines on it´s own, but it was primarily created to power up the different “Snapin Hosts” Kilohearts offer. These are bigger effects units that utilize all the available snapins and give you a really fun and creative workflow for combining them in any way you can think of. So have a look at Snap Heap and Multipass right now!

Gate
Runs on Windows 7 or greater, 32bit and 64bit Runs on Mac OSX 10.7 or greater, 32bit and 64bit VST 2 compatible Audio Unit compatible AAX compatible Available as Reason Rack Extension Get the Rack Extension
Not all sound is created alike, and sometimes you want to just leave it at the Gate. Quickly cut out low hum and noise from the signal, cut reverb tails short or exaggerate the dynamics in a beat. The possibilities are… maybe not endless, but should cover your gating needs!

kHs Gate has simple but powerful controls for tuning in the desired effect, and can easily be driven by an external sidechain signal. The gate can also be flipped around to make a signal duck under another.

Attack knob
The attack time is the time it takes to for the gate to fully open when the input volume is over the threshold.
Hold knob
The hold time is the minimum time the gate will stay open.
Release knob
The release time is the time it takes to for the gate to fully close when the input volume is under the threshold.
Threshold knob
The volume threshold for when the gate will open.
Tolerance knob
A hysteresis range requiring the volume to drop a set amount of dB under the threshold before closing.
Range knob
The amount to attenuate the signal when the gate is closed.
Look-ahead
When enabled, a 5ms look-ahead will be used, allowing transients through at the cost of latency.
Flip
When flipped, the gate will act in reverse attenuating the signal when the gate is open.
VU Meter
Displays the current input level, the selected threshold and tolerance, and the gate’s current state.
Sidechain
When you select anouther sound source in the sidechain drop-down the plugin uses that source for determining the behaviour of the plugin instead, it still effects the main sound source. This is useful for lowering a lead sound whenever the kick hits.

Remember that song Call on Me by Erik Prytz? It has a lot of sidechaining going on.
Settings panel
Whenever you have your mouse cursor over a snapin theree is a small arrow at the top right corner (not visible in screenshot). It opens a settings panel where you handle presets.

It also has a “randomize” button that can be useful. I guess…
Enabled checkbox
The small checkbox to the left of the plugin name is a checkbox that bypasses the effect when disabled.
Resize handle
The bottom right corner of all Kilohearts plugins is a resize handle for scaling the UI to any size. This allows you to get a good view of the controls whatever the screen resolution, and also comes in handy if you need big controls, e.g. when using Gate as a real-time effect on a touchscreen monitor during a live set. (This is not available when the snapin is used inside a snapin host.)
Get more out of Gate!

Gate shines on it´s own, but it was primarily created to power up the different “Snapin Hosts” Kilohearts offer. These are bigger effects units that utilize all the available snapins and give you a really fun and creative workflow for combining them in any way you can think of. So have a look at Snap Heap and Multipass right now!

Chorus
Runs on Windows 7 or greater, 32bit and 64bit Runs on Mac OSX 10.7 or greater, 32bit and 64bit VST 2 compatible Audio Unit compatible AAX compatible Available as Reason Rack Extension Get the Rack Extension
The Chorus enhances the stereo effect and presence of a sound by mixing it with delayed versions of itself. It’s like your own personal choir!

Delay knob
The average delay for the delayed voices.
Rate knob
The frequency of how fast to vary the delay.
Depth knob
How much to vary the delay.
Spread knob
Stereo width of the effect. A lower value will go towards a mono output.
Taps
The number of chorus voices.
Mix knob
The dry/wet mix of this effect. A lower value will let some of the unmodified signal through.
Settings panel
Whenever you have your mouse cursor over a snapin theree is a small arrow at the top right corner (not visible in screenshot). It opens a settings panel where you handle presets.

It also has a “randomize” button that can be useful. I guess…
Enabled checkbox
The small checkbox to the left of the plugin name is a checkbox that bypasses the effect when disabled.
Resize handle
The bottom right corner of all Kilohearts plugins is a resize handle for scaling the UI to any size. This allows you to get a good view of the controls whatever the screen resolution, and also comes in handy if you need big controls, e.g. when using Chorus as a real-time effect on a touchscreen monitor during a live set. (This is not available when the snapin is used inside a snapin host.)
Get more out of Chorus!

Chorus shines on it´s own, but it was primarily created to power up the different “Snapin Hosts” Kilohearts offer. These are bigger effects units that utilize all the available snapins and give you a really fun and creative workflow for combining them in any way you can think of. So have a look at Snap Heap and Multipass right now!

Filter
Runs on Windows 7 or greater, 32bit and 64bit Runs on Mac OSX 10.7 or greater, 32bit and 64bit VST 2 compatible Audio Unit compatible AAX compatible Available as Reason Rack Extension Get the Rack Extension
Sometimes in life, sound comes with frequencies you don’t like. So why not cut them out?

kHs Filter is a resonant filter with 7 modes, swiftly getting rid of frequencies you don’t like or enhancing frequencies you do. And it’s doing it and doing it and doing it good.

Type
The type of filter. Select between low pass, band pass, high pass, notch, low shelf, peak and high shelf filters.
Cutoff knob
The operating frequency of the filter. In a low-pass filter this is the frequency where the signal is reduced by 3dB.
Q knob
The filter Q setting. High values for Q will make the filter resonate at the cutoff frequency.
Gain
The gain value for the low shelf, peak and high shelf filter types.
Settings panel
Whenever you have your mouse cursor over a snapin theree is a small arrow at the top right corner (not visible in screenshot). It opens a settings panel where you handle presets.

It also has a “randomize” button that can be useful. I guess…
Enabled checkbox
The small checkbox to the left of the plugin name is a checkbox that bypasses the effect when disabled.
Resize handle
The bottom right corner of all Kilohearts plugins is a resize handle for scaling the UI to any size. This allows you to get a good view of the controls whatever the screen resolution, and also comes in handy if you need big controls, e.g. when using Filter as a real-time effect on a touchscreen monitor during a live set. (This is not available when the snapin is used inside a snapin host.)
Get more out of Filter!

Filter shines on it´s own, but it was primarily created to power up the different “Snapin Hosts” Kilohearts offer. These are bigger effects units that utilize all the available snapins and give you a really fun and creative workflow for combining them in any way you can think of. So have a look at Snap Heap and Multipass right now!

Phaser
Runs on Windows 7 or greater, 32bit and 64bit Runs on Mac OSX 10.7 or greater, 32bit and 64bit VST 2 compatible Audio Unit compatible AAX compatible Available as Reason Rack Extension Get the Rack Extension
Beam me up, Scotty! No matter if you set the knob to stun or kill, Phaser can spice up your life with twirly frequency sweeps.

The Phaser will filter the input signal, creating a series of moving peaks and troughs in the audio spectrum.

Pretty much all the bad things with signal phase issues, but turned into an effect and labeled “cool”.

Order knob
A higher order setting will increase the order of the filters used by the phaser, creating a more pronounced effect with more peaks and troughs.
Cutoff knob
Sets the cutoff of the filters in the phaser, moving the peaks and troughs in the audio spectrum.
Depth knob
Adjusts the depth of modulation of the cutoff.
Rate knob
Adjusts the rate of modulation of the cutoff.
Spread knob
Adds a phase offset for the cutoff modulation between the left and right channels, for a stereo widening effect.
Mix knob
The dry/wet mix of this effect. A lower value will let some of the unmodified signal through.
Settings panel
Whenever you have your mouse cursor over a snapin theree is a small arrow at the top right corner (not visible in screenshot). It opens a settings panel where you handle presets.

It also has a “randomize” button that can be useful. I guess…
Enabled checkbox
The small checkbox to the left of the plugin name is a checkbox that bypasses the effect when disabled.
Resize handle
The bottom right corner of all Kilohearts plugins is a resize handle for scaling the UI to any size. This allows you to get a good view of the controls whatever the screen resolution, and also comes in handy if you need big controls, e.g. when using Phaser as a real-time effect on a touchscreen monitor during a live set. (This is not available when the snapin is used inside a snapin host.)
Get more out of Phaser!

Phaser shines on it´s own, but it was primarily created to power up the different “Snapin Hosts” Kilohearts offer. These are bigger effects units that utilize all the available snapins and give you a really fun and creative workflow for combining them in any way you can think of. So have a look at Snap Heap and Multipass right now!

Stereo
Runs on Windows 7 or greater, 32bit and 64bit Runs on Mac OSX 10.7 or greater, 32bit and 64bit VST 2 compatible Audio Unit compatible AAX compatible Available as Reason Rack Extension Get the Rack ExtensionLeft speaker.Right speaker.
W i d e

Narrow

That’s what this plugin does. Questions?

(The Stereo snapin can adjust the stereo width and panning. It also displays the current balance and channel correlation visually.)

Width knob
Adjusts the stereo width. The input audio must have at least a little stereo information for this knob to do anything.
Pan knob
Adjusts the panning.
Mid knob
Controls how much of the non-stereo content to let through.
Stereo Meter
Displays the current balance and channel correlation. When the meter moves into the red area the correlation is less than zero, which can cause problems with mono compatibility.
Settings panel
Whenever you have your mouse cursor over a snapin theree is a small arrow at the top right corner (not visible in screenshot). It opens a settings panel where you handle presets.

It also has a “randomize” button that can be useful. I guess…
Enabled checkbox
The small checkbox to the left of the plugin name is a checkbox that bypasses the effect when disabled.
Resize handle
The bottom right corner of all Kilohearts plugins is a resize handle for scaling the UI to any size. This allows you to get a good view of the controls whatever the screen resolution, and also comes in handy if you need big controls, e.g. when using Stereo as a real-time effect on a touchscreen monitor during a live set. (This is not available when the snapin is used inside a snapin host.)
Get more out of Stereo!

Stereo shines on it´s own, but it was primarily created to power up the different “Snapin Hosts” Kilohearts offer. These are bigger effects units that utilize all the available snapins and give you a really fun and creative workflow for combining them in any way you can think of. So have a look at Snap Heap and Multipass right now!

Ladder Filter
Runs on Windows 7 or greater, 32bit and 64bit Runs on Mac OSX 10.7 or greater, 32bit and 64bit VST 2 compatible Audio Unit compatible AAX compatible Available as Reason Rack Extension Get the Rack Extension
When you’re looking for a bit of that vintage feel, Ladder filter will twist your basses into squelching retro-licks akin to those of the Moog or the 303. Crank the drive up an extra notch and it will even function as a warm distortion. Mmm, smooth.

The Ladder Filter simulates low pass filters found in classic hardware synths.

Cutoff knob
The filter cutoff frequency.
Resonance knob
The filter resonance setting. High values will make the filter resonate at the cutoff frequency.
Topology
Selects between transistor ladder and diode ladder topology. The diode ladder have a slightly more gentle rolloff after the cutoff frequency. The two topologies also behave differently when saturation is enabled.
Saturate
Simulates saturation of electronic components in the filter.
Drive knob
Simulates overdrive of the components. Only available in “Saturate” mode.
Bias knob
Simulates bias voltage over the components. Only available in “Saturate” mode.
Settings panel
Whenever you have your mouse cursor over a snapin theree is a small arrow at the top right corner (not visible in screenshot). It opens a settings panel where you handle presets.

It also has a “randomize” button that can be useful. I guess…
Enabled checkbox
The small checkbox to the left of the plugin name is a checkbox that bypasses the effect when disabled.
Resize handle
The bottom right corner of all Kilohearts plugins is a resize handle for scaling the UI to any size. This allows you to get a good view of the controls whatever the screen resolution, and also comes in handy if you need big controls, e.g. when using Ladder Filter as a real-time effect on a touchscreen monitor during a live set. (This is not available when the snapin is used inside a snapin host.)
Get more out of Ladder Filter!

Ladder Filter shines on it´s own, but it was primarily created to power up the different “Snapin Hosts” Kilohearts offer. These are bigger effects units that utilize all the available snapins and give you a really fun and creative workflow for combining them in any way you can think of. So have a look at Snap Heap and Multipass right now!

Comb Filter
Runs on Windows 7 or greater, 32bit and 64bit Runs on Mac OSX 10.7 or greater, 32bit and 64bit VST 2 compatible Audio Unit compatible AAX compatible Available as Reason Rack Extension Get the Rack Extension
The Comb Filter hollows out the sound by carving out frequencies at each multiple of the base frequency, like the teeth of a comb.

The Comb Filter will mix the signal with a delayed version of itself, creating a filter with repeated troughs and peaks across the spectrum.

It’s also possible to process left and right differently in a way that not only gives a wide stereo effect, but also collapses right back to the original signal when mixed to mono. Nifty!

Cutoff display
Cutoff setting for the filter, the distance between each peak.
Polarity
The polarity setting swaps troughs for peaks and vice versa, with the plus setting having a peak at 0 Hz, and the minus setting a trough at 0 Hz.
Stereo
The stereo setting flips the polarity setting for the right channel, allowing the the comb filter to be used for mono compatible stereo widening.
Mix knob
The dry/wet mix of this effect. A lower value will let some of the unmodified signal through.
Settings panel
Whenever you have your mouse cursor over a snapin theree is a small arrow at the top right corner (not visible in screenshot). It opens a settings panel where you handle presets.

It also has a “randomize” button that can be useful. I guess…
Enabled checkbox
The small checkbox to the left of the plugin name is a checkbox that bypasses the effect when disabled.
Resize handle
The bottom right corner of all Kilohearts plugins is a resize handle for scaling the UI to any size. This allows you to get a good view of the controls whatever the screen resolution, and also comes in handy if you need big controls, e.g. when using Comb Filter as a real-time effect on a touchscreen monitor during a live set. (This is not available when the snapin is used inside a snapin host.)
Get more out of Comb Filter!

Comb Filter shines on it´s own, but it was primarily created to power up the different “Snapin Hosts” Kilohearts offer. These are bigger effects units that utilize all the available snapins and give you a really fun and creative workflow for combining them in any way you can think of. So have a look at Snap Heap and Multipass right now!

Formant Filter
Runs on Windows 7 or greater, 32bit and 64bit Runs on Mac OSX 10.7 or greater, 32bit and 64bit VST 2 compatible Audio Unit compatible AAX compatible Available as Reason Rack Extension Get the Rack Extension
If your music doesn’t get enough “Aahs” and “Oohs”, maybe you should try putting them into the actual music? Formant Filter shapes the sound in a similar way to how the vocal tract works, leading to vowel-esque sounds. So, channel your inner robo-Tarzan.

The Formant Filter will boost two frequencies to mimic the sounds of different vowels.

Vowel Selector
Selects two frequencies to boost. We’ve put the phonetic symbols of some common vowel sounds on the selection pane. (Honestly that doesn’t help much. I have no idea how ɤ sounds anyway.)

Applying a LFO modulation to either axis of the pane can give some nice human-esque qualities to your sound.
Q knob
Adjust how powerful and narrow the frequency boost is.
Lows
Allow low frequencies through the filter.
Highs
Allow high frequencies through the filter.
Settings panel
Whenever you have your mouse cursor over a snapin theree is a small arrow at the top right corner (not visible in screenshot). It opens a settings panel where you handle presets.

It also has a “randomize” button that can be useful. I guess…
Enabled checkbox
The small checkbox to the left of the plugin name is a checkbox that bypasses the effect when disabled.
Resize handle
The bottom right corner of all Kilohearts plugins is a resize handle for scaling the UI to any size. This allows you to get a good view of the controls whatever the screen resolution, and also comes in handy if you need big controls, e.g. when using Formant Filter as a real-time effect on a touchscreen monitor during a live set. (This is not available when the snapin is used inside a snapin host.)
Get more out of Formant Filter!

Formant Filter shines on it´s own, but it was primarily created to power up the different “Snapin Hosts” Kilohearts offer. These are bigger effects units that utilize all the available snapins and give you a really fun and creative workflow for combining them in any way you can think of. So have a look at Snap Heap and Multipass right now!

Pitch Shifter
Runs on Windows 7 or greater, 32bit and 64bit Runs on Mac OSX 10.7 or greater, 32bit and 64bit VST 2 compatible Audio Unit compatible AAX compatible Available as Reason Rack Extension Get the Rack Extension
Are you out of tune? Do you want to be? Either way, pitch shifter uses grain delay to bring the pitch where you want it to be. Or at least somewhere else from where it already is.

The Pitch Shifter will adjust the pitch of the input signal up or down.

Pitch display
How much to adjust the pitch, in semitones.
Jitter knob
How much randomness to add to the pitch. A high jitter setting can give a unison-like effect. This is only available when Correlate is off.
Grain Size knob
During processing the pitch shifter chops up the audio into small snippets called grains. This setting adjusts the length of the grains, which can influence the sound.
Mix knob
The dry/wet mix of this effect. A lower value will let some of the unmodified signal through.
Correlate
Enables a more advanced algorithm resulting in a more clear effect for many inputs. Be careful though as it might have problems with complex pads and textures.
Settings panel
Whenever you have your mouse cursor over a snapin theree is a small arrow at the top right corner (not visible in screenshot). It opens a settings panel where you handle presets.

It also has a “randomize” button that can be useful. I guess…
Enabled checkbox
The small checkbox to the left of the plugin name is a checkbox that bypasses the effect when disabled.
Resize handle
The bottom right corner of all Kilohearts plugins is a resize handle for scaling the UI to any size. This allows you to get a good view of the controls whatever the screen resolution, and also comes in handy if you need big controls, e.g. when using Pitch Shifter as a real-time effect on a touchscreen monitor during a live set. (This is not available when the snapin is used inside a snapin host.)
Get more out of Pitch Shifter!

Pitch Shifter shines on it´s own, but it was primarily created to power up the different “Snapin Hosts” Kilohearts offer. These are bigger effects units that utilize all the available snapins and give you a really fun and creative workflow for combining them in any way you can think of. So have a look at Snap Heap and Multipass right now!

Tape Stop
Runs on Windows 7 or greater, 32bit and 64bit Runs on Mac OSX 10.7 or greater, 32bit and 64bit VST 2 compatible Audio Unit compatible AAX compatible Available as Reason Rack Extension Get the Rack Extension
At about the same time as dinosaurs roamed the earth, magnetic tape was the hottest way to store recorded audio. Naturally, cave men discovered that starting and stopping the tape while playing back would lead to interesting effects.

kHs Tape Stop simulates this arcane technology in a simple way, allowing you to get great spindown/speedup sounds quickly with the push of a button. What’s next? Harnessing the power of fire?

Play button
The current state of the tape motor.
Stop Time knob
Time until the tape motor reaches full stop when stopping.
Start Time knob
Time until the tape motor reaches full speed when starting.
Curve
The speed curve of the tape motor starting/stopping.
Settings panel
Whenever you have your mouse cursor over a snapin theree is a small arrow at the top right corner (not visible in screenshot). It opens a settings panel where you handle presets.

It also has a “randomize” button that can be useful. I guess…
Enabled checkbox
The small checkbox to the left of the plugin name is a checkbox that bypasses the effect when disabled.
Resize handle
The bottom right corner of all Kilohearts plugins is a resize handle for scaling the UI to any size. This allows you to get a good view of the controls whatever the screen resolution, and also comes in handy if you need big controls, e.g. when using Tape Stop as a real-time effect on a touchscreen monitor during a live set. (This is not available when the snapin is used inside a snapin host.)
Get more out of Tape Stop!

Tape Stop shines on it´s own, but it was primarily created to power up the different “Snapin Hosts” Kilohearts offer. These are bigger effects units that utilize all the available snapins and give you a really fun and creative workflow for combining them in any way you can think of. So have a look at Snap Heap and Multipass right now!

Delay
Runs on Windows 7 or greater, 32bit and 64bit Runs on Mac OSX 10.7 or greater, 32bit and 64bit VST 2 compatible Audio Unit compatible AAX compatible Available as Reason Rack Extension Get the Rack Extension
While large echoing cavernous chambers seldom are the first pick for a good acoustic space, Delay effects have been ubiquitous in sound processing for a long time.

The kHs Delay can be run both free running and tempo synced with various stereo and feedback options. Most notable however is the duck feature, which optionally only lets the echoed sound through when there is no dry input signal. This allows for long and heavy delay while still avoiding clutter over the original sound. Clever!

Delay display
The amount of time beore the delayed sound starts playing. This will be expressed in milliseconds or as parts of a beat, depending on Sync Mode.
Sync Mode
When sync is enabled the delay time will be synchronized to the song tempo.
Feedback knob
The feedback setting will cause the delayed sound to feed back into the delay. This will create an exponentially decaying echo.
Pan knob
Adjust the panning of the delayed sound.
Ping-Pong
Swaps the left and the right channel of the delayed sound when it is fed back into the delay. When combined with panning this will make the echo bounce back and forth between the speakers.
Duck knob
When duck is turned up, the output volume from the delay will automatically be lowered when the input volume is high.
Mix knob
The dry/wet mix of this effect. A lower value will let some of the unmodified signal through.
Settings panel
Whenever you have your mouse cursor over a snapin theree is a small arrow at the top right corner (not visible in screenshot). It opens a settings panel where you handle presets.

It also has a “randomize” button that can be useful. I guess…
Enabled checkbox
The small checkbox to the left of the plugin name is a checkbox that bypasses the effect when disabled.
Resize handle
The bottom right corner of all Kilohearts plugins is a resize handle for scaling the UI to any size. This allows you to get a good view of the controls whatever the screen resolution, and also comes in handy if you need big controls, e.g. when using Delay as a real-time effect on a touchscreen monitor during a live set. (This is not available when the snapin is used inside a snapin host.)
Get more out of Delay!

Delay shines on it´s own, but it was primarily created to power up the different “Snapin Hosts” Kilohearts offer. These are bigger effects units that utilize all the available snapins and give you a really fun and creative workflow for combining them in any way you can think of. So have a look at Snap Heap and Multipass right now!

The Kilohearts Toolbox will change the way you think about sound design forever. It contains a huge number of high-quality audio effect building blocks and Snap Heap, the perfect tool for combining them. Together these components offer incredible ease of use and versatility which leads to more creativity and inspiration. Forget about all those complex routings and sends! With The Kilohearts Toolbox you will be quicker then you ever thought possible!

These plugins where designed to do away with as much complexity and frustration as possible, making your workflow so much faster and more fun. By saving your valuable time with straight-forward UI:s and easy-to-understand labels you can focus on creativity.

The kHs Toolbox contains all our plugins and we keep creating more. If you already own any of our products, be sure to log in to see your personalized upgrade discounts.

NOTICE: When purchasing the the kHs Toolbox you will not automatically get licenses to future additions to the bundle, but you can upgrade for a heavily reduced cost if you log in.

Homepage: https://kilohearts.com/products/2015_bundle

One comment

Leave a Reply

Your email address will not be published. Required fields are marked *